A mobile measurement partner (MMP) is a third-party service that app advertisers use to attribute installs, re-engagements and in-app events to the ad networks, campaigns and links behind them. It measures outside each network’s own dashboard, using eligible device-level signals, network integrations and privacy-preserving reports. Its credit depends on the data available and the attribution rules applied, and it does not show which ads produced users who would not otherwise have come. AppsFlyer, Branch, Adjust, Kochava and Singular are the names buyers give. What the definition leaves out is that buyers bring two different problems to the same tool, and that Apple’s privacy changes made the first of them harder.
What is a mobile measurement partner?
A mobile measurement partner is a third-party service, built into an app through a software development kit (SDK) plus server-side events and connections to ad networks, that attributes app installs and in-app events to the ad networks, campaigns and links that drove them. It applies one set of attribution rules across the networks that take part, reconciles their reporting and reduces duplicate credit when several claim the same measured conversion. Some activity cannot be matched to a user, and privacy-restricted network reporting may arrive aggregated or modelled, so it works as a common attribution reference, not proof that every install was caused by an ad.
Most MMPs also sell deep linking, links that open a specific screen in the app or, for someone without the app, route them through the store to that screen after install, along with fraud screening and reporting on Apple’s and Google’s privacy frameworks.
It is not product analytics, which describes what people do inside the app, and it is not an incrementality test, which measures what the ads caused.
The interviews add who uses it, and for which half of the job:
In these interviews an MMP does two jobs that different teams own. Growth and paid-media teams use it as the source of truth for installs bought with ad spend; lifecycle and CRM teams use it to put a deep link behind every email, text and QR code.
The interviewees’ titles show the split. In interviews containing an AppsFlyer rating, about four in ten interviewees hold a growth, paid-media or acquisition title, and one holds a lifecycle or CRM title. In interviews containing a Branch rating, more than a third hold a lifecycle, CRM, retention or loyalty title and about one in nine a performance title. That describes the people interviewed about each product, not each vendor’s customer base or who owns the contract.
What is the difference between an MMP, product analytics and deep linking?
An MMP attributes installs and activity to eligible sources; product analytics analyses what users do in the product; deep linking routes a tap to the right screen. The terms blur because MMP vendors sell link creation, routing and attribution together, and for some buyers links are the only thing they use an MMP for. A company can also use the operating systems’ own links, or a separate link provider, without a full MMP package.
Product analytics tools such as Amplitude, Mixpanel and Google Analytics for Firebase track behaviour inside the product: funnels, retention, feature use. An MMP is built around the install and the moments either side of it, matched against ad networks’ clicks, impressions and spend.
The boundary is moving from the vendor side. In November 2026 AppsFlyer’s site lists Product Analytics and Web Attribution among its products, and Singular’s says it unifies cost, creative and attribution data across channels. These are vendor descriptions, not what buyers here report using.
Buyers who run both describe the line plainly. A convenience-store chain’s marketing-technology director says “Mixpanel is used for the app, like just to understand data on the app and see how customers use the app. We obviously use Kochava for the linkage right now to figure out who's clicked on what link.” A media company’s paid-media director splits measurement by surface, the MMP “for the mobile side” and GA4 “for the web,” and names the hard part: “There is a challenge between syncing attribution across both of those.” And a fashion retailer migrating to AppsFlyer explains why links pulled it there: “We wanted to be able to measure deferred and deep linking, which you can't do without a mobile measurement partner.”
Against product analytics
Product analytics reports what happens after someone is in the app, and uses the acquisition source as one input. An MMP supplies that input where it can be determined: which network, campaign or link the install came from. For some users the source stays unknown or aggregated, and neither tool shows whether an ad caused the install.
Against deep linking
Apple’s Universal Links and Android App Links open an installed app without an MMP. Deferred deep links, which keep the destination through a first install, usually run through an MMP or link service, though parts can be built in-house, and how well they work depends on the OS, the setup and privacy rules. Google’s free Firebase Dynamic Links shut down on August 25, 2025, leaving native links in place; its FAQ points developers to them for installed apps and to providers including AppsFlyer, Branch, Adjust, Kochava and Singular for deferred links. A European travel company says it started paying AppsFlyer for deferred links “since Firebase deprecated the Dynamic Links feature.”
Against attribution and mix modeling
Multi-touch attribution and mix modeling try to credit every channel, including web, TV and offline. An MMP’s credit is mostly last-touch on app installs, and buyers who want the wider view build or buy models on top of it. Those methods are on What is marketing attribution and What is marketing mix modeling.
Who needs a mobile measurement partner?
The strongest case is a company advertising across several app-acquisition networks that needs consistent attribution, or one that needs advanced deferred linking alongside campaign measurement. In these interviews that is consumer businesses where the app is a sales or subscription channel: streaming and media companies, restaurant chains with ordering apps, retailers, fintech and banking apps, mobile games and sports betting, and health and fitness apps. A company that only needs email or text links to open an installed app may manage with native links or a link-only product, which is our reading rather than something buyers here describe.
For buyers without one, the gap shows up when they try to buy app media. A gym chain launching its first app-only product says that among the companies and agencies it talks to about mobile app media, “it's kind of like a requirement for engaging is having that MMP in place.” A food-media subscription company shopping for one says of its paid media, “It's a bit stunted because of our lack of MMP,” which leaves it running mostly app-store ads.
The stacks around an MMP are app-first. Interviews that rate an MMP also rate a customer engagement platform, the tool that sends push, in-app and email messages, in about six in ten cases, against about one in eight across other interviews. Interviews that rate Amplitude or Mixpanel come close, at about half, so this describes app-first stacks generally rather than MMP buyers alone. The difference that is specific to MMP buyers is GA4: they rate it in fewer than one in five interviews, against about three in ten among Amplitude and Mixpanel interviews and about a third across all interviews. These are products rated in the same interview, not everything a company runs, and they do not show the tools are integrated or were bought together. The same pattern, seen from one messaging platform’s side, has its own stack page.
What do buyers use a mobile measurement partner for?
Vendors list many capabilities. Among buyers who describe what their MMP does for the company, four jobs recur, and they overlap. Ordered by how often buyers describe them, not by what the products offer:
- Credit paid media for installs
- Route owned-channel links into the app
- Feed incrementality tests and in-house models
- Screen out install fraud
Paid-media attribution is the main job, and fraud screening is the one buyers mention least. Least mentioned is not least used: fraud screening can run without anyone discussing it, or be counted as part of attribution.
Credit paid media for installs
The core of the category. The MMP matches installs and later in-app events to the networks and campaigns that drove them, and gives the advertiser one count to hold each network’s self-reported numbers against.
A consumer app’s user-acquisition lead calls it “the link between the metrics that we see in our ad networks or ad platforms” and the app’s own metrics, and “our source of truth, essentially, to see how many new users we've acquired from paid media campaigns.” A mobile games company’s acquisition head describes it as “basically the middleman between us, the client, and an ad network.”
Route owned-channel links into the app
Deep links in emails, texts, push messages and QR codes, so a tap opens the right screen instead of the browser or the home screen. This is the lifecycle team’s job, and Branch is the tool buyers name most for it.
A delivery marketplace’s CRM team says “we've used Branch on every single link, so it opens in app.” A fintech’s lifecycle director uses it for QR codes in emails: “we have a QR code for every destination in our application.”
Feed incrementality tests and in-house models
Teams with their own data science send the MMP’s event data to the warehouse and build attribution or mix models on it, or buy the incrementality products some MMPs now sell, as one sports-gaming app did.
A consumer marketplace app’s growth leader describes AppsFlyer as “a mobile tracking platform that does attribution as well, but I wouldn't call it an attribution tool”; its data powers the company’s in-house attribution modeling. A consumer subscription app’s analytics director says “Our MMP is Adjust,” while the attribution models are built by the team.
Screen out install fraud
Filtering fake installs and click spam before networks are paid for them. Buyers who mention it treat it as part of the attribution tool rather than a separate purchase.
A large streaming service says fraud such as “click injection” and impression flooding by affiliate partners is handled inside AppsFlyer, “because it's a part of their tool.”
The order also explains a pattern that runs through these interviews: several companies bought the tool for one job and leave the others idle. A consumer media app’s new marketing-technology lead found AppsFlyer used only for installs and reinstalls, which it calls “like getting a Ferrari” and barely driving it, and is rebuilding its events. A restaurant chain says “We have Branch for deep linking, but we need to use them more on the attribution side.” A convenience-store chain says of Kochava that “I don't think we maximize how we could use it.” A consumer app renewed its Branch contract in August 2026 and downsized it. When a renewal comes up, it is worth knowing which of the four jobs the contract is actually paying for.
Which mobile measurement partners do buyers use?
AppsFlyer and Branch are the two MMPs buyers name most, by a wide margin. AppsFlyer averages 7.6/10 and Branch 7.5/10. Kochava averages around 7/10. Singular, Adjust and Tenjin are also named, by too few buyers to rate.
| Tool | Rating | What it does here |
|---|---|---|
| AppsFlyer | 7.6 | The MMP growth and paid-media teams name most, rated mainly for install attribution, with deep links, fraud screening and incrementality sold beside it. |
| Branch | 7.5 | Named most by lifecycle and CRM teams, often for deep linking alone; some buyers also use it as their install count. |
| Kochava | around 7 | Too few buyers for a decimal. App attribution, which its site now describes as omnichannel and extends to connected TV. |
| Singular | not rated | Too few buyers rated it. Attribution combined with ad-cost data across networks, by its own description. |
| Adjust | not rated | Too few buyers rated it. An MMP buyers name beside AppsFlyer and Branch when listing the field. |
Built for app measurement
AppsFlyer · Branch · Kochava · Singular · Adjust · Tenjin
Used beside or instead of one
Google Analytics for Firebase · GA4 · Amplitude · Mixpanel · ad networks’ own reporting · in-house attribution and mix models
Most companies here describe one MMP. The few that run two split them by job. A media company uses Branch and Kochava side by side and explains the division: “On the Kochava side, they do have some additional integrations with connected TV that are a little bit more challenging to accomplish on the Branch side.” A sports-gaming app running Branch for referral and partner links and AppsFlyer for attribution was, in December 2025, considering moving everything to AppsFlyer, because “having two MMPs causes data headaches for us.” An online fashion marketplace was considering the opposite move in September 2026, toward Branch, citing its deep linking and web-to-app journeys. Both were open evaluations, not completed switches, and the ratings in the table come from different buyers, not from the same companies before and after.
The vendor-by-vendor read, what buyers praise and complain about in each of the two leaders and which kinds of teams end up on which, is on AppsFlyer vs. Branch.
How do MMPs measure installs after Apple’s privacy changes?
With much less user-level data on iOS, and with Apple’s privacy-restricted reports filling part of the gap. Since iOS 14.5, Apple requires apps to get a person’s permission through App Tracking Transparency (ATT) before tracking them across other companies’ apps and websites or reading the device’s advertising identifier; without permission the identifier reads as zeros. Data an app keeps for its own analytics, without sharing it to track people across companies, is outside that rule, and Apple’s attribution frameworks work whatever the person chose. For campaigns that reach people without a consented identifier, those frameworks give privacy-restricted reports, not the person-level journey MMPs could once stitch together.
The frameworks are SKAdNetwork and the newer AdAttributionKit, available since iOS 17.4. Both send install reports, called postbacks, that carry no user- or device-specific data, and the campaign and conversion detail each one carries depends on a privacy threshold Apple sets to keep people within a crowd. AdAttributionKit can also credit a re-engagement, when someone who already has the app taps an ad. The ad network receives the postbacks, and the advertised app’s developer can opt in to receive copies of the winning ones. As of November 2026, Apple’s SKAdNetwork documentation directs app ad campaigns to AdAttributionKit and documents how the two frameworks interoperate, so our suggestion is to check which framework, and which fields, each of your networks and your MMP supports.
On Android, users can reset or delete Google’s advertising ID, so measurement there depends on identifiers, SDKs, network reporting and Google’s policies. Google announced on October 17, 2025 that it would retire several Privacy Sandbox technologies, including the Attribution Reporting API on Android and Chrome, and said work on an interoperable attribution standard would continue at the W3C. There is no Privacy Sandbox API to plan around as a replacement for conventional Android attribution, so evaluate what each vendor measures on Android today.
Few buyers raise any of this when they describe their MMP, and the ones who do describe a tool hired to reconcile what is left. An athletic apparel retailer’s search lead gives Apple’s changes as the reason it has one: “it created a disconnect between paid marketing attribution and a consumer's app install,” and an MMP is how it stitches the journey back together. A fintech’s performance-marketing director credits AppsFlyer’s SKAN tooling for understanding its iOS campaigns. An online apparel retailer says “general app privacy has caused reporting to be fairly opaque,” and a streaming app in 2024 called Apple’s framework “a black box.” A telehealth company says ATT is part of why it leans on mix modeling, because many iOS devices cannot be tracked.
Two limits come up with or without Apple. A mobile games company notes that MMP credit is “purely based on a last-touch or a last-click basis,” which it says skews toward the biggest networks. And a sports-betting company said in December 2025 that AppsFlyer is good on mobile but that on desktop and mobile web “the data gets very hard to decipher”; a fintech said in June 2026 that it could not yet “cross into mobile web.” Those describe their setups at the time. In November 2026 AppsFlyer’s site lists Web Attribution and Web-to-App among its products, which is a vendor description to test rather than a buyer result.
Want this checked against your own stack?
Start my checkup →Should you buy a mobile measurement partner?
An MMP is most useful when you spend across several acquisition networks and need consistent attribution of installs, re-engagements and the events that follow. When the only job is opening email and text links in the app, native links or a link-only product may be enough. Several buyers above pay for capabilities they do not use, so before buying a full MMP, decide whether the need is attribution, deferred linking, fraud screening, data exports or several of them.
The checks below are our recommendation, drawn from these accounts rather than a practice buyers describe. First, map the events and who owns them: which team owns acquisition attribution, lifecycle links, SDK instrumentation and the events sent to the warehouse or messaging platform, and which installs, re-engagements, subscriptions and purchases need measuring. Second, validate integrations on the networks you actually buy: for each partner, whether you get device-level, aggregated or modelled data, whether cost data imports, how duplicate claims are settled, and what exports reach your warehouse and any agency that expects to read the data. Reconcile the results with app-store data, your own events and the networks’ reports, without expecting an exact match. Third, test links separately from attribution: links to an installed app, first-install and deferred links, and links in email, text and QR codes, through both Universal Links and App Links. Confirm the right screen opens after install where the platform allows it, and note where privacy, browser or operating-system rules stop it. Fourth, test iOS and Android under real privacy conditions: iOS users who granted tracking permission and those who did not, the SKAdNetwork or AdAttributionKit fields each network returns, and mobile web to app if it matters, on your own campaigns during the trial. Keep attributed installs apart from incremental ones; whether the ads caused them needs a holdout, geo test or other incrementality method run apart from the attribution report. Fifth, price the whole contract in the vendor’s own units at your expected volume: installs or conversions, event limits, link volume, fraud screening, exports, implementation support and any add-on products, and compare quotes only once the scope matches.
Our last recommendation is to weigh the cost of leaving before signing. Moving can mean a new SDK, new event mapping, network integrations, data pipelines, privacy approvals and report definitions. A sports organization that wanted a different MMP could not move, because “to integrate a new MMP requires so many approvals going through legal and data and engineering.” If the provider runs your branded links, ask who controls the link domain, what happens to live campaign links after cancellation, and whether routing can continue through a replacement, and confirm export rights, access to historical data and a realistic period of running both in parallel. For the two leaders side by side, see AppsFlyer vs. Branch; for crediting every channel rather than app installs, What is marketing attribution; and for measuring what ads caused, What is incrementality testing.
Common questions
What is a mobile measurement partner (MMP)?
A mobile measurement partner is a third-party service, built into an app through a software development kit and connected to ad networks, that attributes app installs, re-engagements and in-app events to the networks, campaigns and links behind them. It applies one set of attribution rules across the participating networks and reduces duplicate credit when several claim the same conversion, which makes it a common attribution reference rather than proof that ads caused each install. AppsFlyer, Branch, Adjust, Kochava and Singular are the MMPs buyers name.
What does an MMP do?
In buyer interviews an MMP does four jobs, in this order of how often buyers describe them: crediting paid media for installs, routing email, text and QR-code links into the right screen of the app, feeding incrementality tests and in-house attribution models, and screening out install fraud. The first two are owned by different teams: growth and paid-media teams for attribution, lifecycle and CRM teams for links.
What is the difference between an MMP and product analytics?
An MMP answers which ad or link brought a user in; product analytics answers what users do once they are in. Tools such as Amplitude, Mixpanel and Google Analytics for Firebase track funnels, retention and feature use inside the app, while an MMP is built around the install and matches it to ad networks’ clicks and spend where the source can be determined. Neither shows what the ads caused. Buyers in these interviews often run one of each, and some vendors now sell both.
Is deep linking part of an MMP?
Usually, but it is a separate job. Deep links open a specific screen in an app, and deferred deep links send someone without the app to the store and then to that screen after install. Most MMPs sell deep linking, and some buyers use an MMP for nothing else. Apple’s Universal Links and Android App Links open installed apps without an MMP, while deferred links commonly run through an MMP or a specialised link service. Google’s free Firebase Dynamic Links shut down on August 25, 2025, and Google points developers to native links for installed apps and to third-party providers for deferred links.
Which mobile measurement partners do buyers use?
AppsFlyer and Branch are the two buyers name most, and AppsFlyer averages 7.6/10 and Branch 7.5/10 among buyers who rated them. Kochava averages around 7/10. Singular, Adjust and Tenjin are also named, by too few buyers to rate. Most companies in these interviews describe one MMP; the few that run two split them by job, and one is considering consolidating to end the reconciliation work.
How did iOS 14.5 and App Tracking Transparency change mobile attribution?
Since iOS 14.5, apps need a person’s permission through App Tracking Transparency to track them across other companies’ apps and websites or to read the device’s advertising identifier, which otherwise reads as zeros. Without it, attribution for those users relies on Apple’s own frameworks, SKAdNetwork and AdAttributionKit, which send privacy-restricted reports that carry no user- or device-specific data, with detail limited by a privacy threshold. Buyers who raise it describe more opaque reporting and a reason to hire an MMP to reconcile what is left.
Do you need an MMP if you use Google Analytics or Firebase?
If you buy ads on several networks to drive app installs, usually yes: buyers describe needing one count to hold the networks’ own claims against, and one says agencies expect an MMP before they will run app media. If the only job is opening links in the app, platform deep links or a link tool may be enough. Some buyers run GA4 for the web and an MMP for the app, and one names syncing attribution across the two as the hard part.
Get a checkup on your tech stack
A checkup for your marketing stack, built from hundreds of verified buyer interviews: what matters most to you, a shortlist for your stack, and your next steps.
Start my checkupFree · no password · your answers are anonymized before they inform research like this.